ALUBUBBLE:
Alububble® is a superior performance radiant barrier material, simple to use and cost effective. This product is manufactured using a modern sophisticated continuous laminating process which consists of a layer of low density Polyethylene air cells laminated on both sides with aluminium foil or alternatively on one side with a white polyethylene layer which provides an aesthetically pleasing finish to the underside.
Advanced Benefits and Features of Alububble
Does not crack – UV protected
Does not discolour
Does not delaminate
Non Toxic.
Non Carcinogenic.
Does not attract rodents.
Has no fibres
Easy to install – No safety equipment needed during installation.
Reduces Dust penetration into the roof space.
Not static
Various Colors Available
Applications
- Domestic: Water Vapour barrier in Under Roof Tile or Under Roof Sheeting applications.
Retrofit to existing buildings - Industrial Application – Use in conjunction with straining wire placed at 383mm centres and Double Sided Tape as per the manufacturers installation guidelines. No straining wires needed for domestic application with Timber Trusses. Alububble 2906 (Single sided
Alububble 1983 (Double sided Alububble)
Tested in accordance with and conforms to SANS 1381 part 4: 1985 (Full report available on request)
Thermal Property Values
Tested at the Thermal Test Laboratory in controlled conditions in accordance with ASTM C518 2004.
Product was tested with air gaps of 40mm at the top (Hot side) and 60mm at the bottom (Cold side).
Thermal Resistance “R” (m²K)/W: 1.454
Thermal Conductivity “K” W/m.K: 0.927
Fire Properties
Tested to SANS 428 and awarded a B/B1/2/H (SP) (With Sprinklers).
Quality Management System
Products are manufactured according to ISO 9001:2008 Quality Management System
Alububble 2906 (Single sided Alububble)
Alububble® conforms to SANS 1381 part 4: 1985 (Full report available on request)
Thermal Property Values
Tested at the Thermal Test Laboratory in controlled conditions in accordance with ASTM C518 2004.
Product was tested with air gaps of 40mm at the top (Hot side) and 60mm at the bottom (Cold side).
Thermal Resistance “R” (m²K)/W: 1.103
Thermal Conductivity “K” W/m.K: 0.091
Fire Properties
Tested to SANS 428 and awarded a B/B1/2/H (USP) (No Sprinklers).
Quality Management System
Products are manufactured according to ISO 9001:2008 Quality Management System
Applications
Recommended for warehouse and factory over purlin application